SONY AV SYSTEM RM-ADP029 Remote Control NEW. Sony AV System RM AAU014 Remote Control New eBay. Sony av system rm adp053 manual. 1600 x 1200 jpeg 178kB. The SONY model number is usually on the back of your SONY product, or on the front of your user manual. This remote control is an Original Remote Control from SONY, it is the same as the remote control supplied with your original SONY product.

Helps communicate with “BRAVIA” Sync-compatible equipment (e.g. BD player, AV amplifier) using HDMI CEC.

With the “Control for HDMI” function, “BRAVIA” Sync helps communicate with “BRAVIA” Sync-compatible equipment using HDMI CEC (Consumer Electronics Control). Activating “Control for HDMI” (“BRAVIA” Sync) • Press HOME, then select → [Channels & Inputs] → [HDMI Settings] → [Control for HDMI] → [On]. • Activate “Control for HDMI” on the connected equipment. For details, refer to the instruction manual of the connected equipment. • “Control for HDMI” (“BRAVIA” Sync) is only available for the connected Sony equipment that has the “BRAVIA” Sync logo or is compatible with “Control for HDMI.” • When specific Sony equipment compatible with “Control for HDMI” (“BRAVIA” Sync) is connected and powered on, and [Control for HDMI] is set to [On], “BRAVIA” Sync is automatically activated on the equipment. Available “BRAVIA” Sync operations BD/DVD player • Automatically turns the “BRAVIA” Sync-compatible equipment on and switches the input to that equipment when you select it from the Home Menu or Sync Menu. • Automatically turns the TV on and switches the input to the connected equipment when the equipment starts to play.

• Automatically turns the connected equipment off when you turn the TV off. • Controls menu operation ( / / / ), playback (e.g., ) and channel selection of the connected equipment through the TV’s remote control. AV amplifier • Automatically turns the connected AV amplifier on and switches the sound output from the TV speaker to the audio system when you turn the TV on.

This function is only available if you have previously used the AV amplifier to output TV sound. • Automatically switches the sound output to the AV amplifier by turning the AV amplifier on when the TV is turned on.

• Automatically turns the connected AV amplifier off when you turn the TV off. • Adjusts the volume (VOL +/–) and mutes the sound (MUTING) of the connected AV amplifier through the TV’s remote control. • When connecting a digital audio system that is compatible with Audio Return Channel (ARC) technology, connect to HDMI IN 1 with an HDMI cable. If connecting a system that is incompatible with “Control for HDMI” or Audio Return Channel, an additional audio connection via DIGITAL AUDIO OUT (OPTICAL) is necessary. Video camera • Automatically turns the TV on and switches the input to the connected video camera when the connected video camera is turned on.

• Automatically turns the connected video camera off when you turn the TV off. • Controls menu operation ( / / / ), playback (e.g., ) and channel selection of the connected equipment through the TV’s remote control. Controlling “BRAVIA” Sync-compatible equipment You can control “BRAVIA” Sync-compatible equipment by the TV’s remote control. Press SYNC MENU, then select [HDMI Device Selection] → the desired equipment.

• 1 Answer SOURCE: I had open a Sony RM-GA010 because the transmitting bulb was stucked inside after a fall. The two screws inside the battery compartment was not really holding the case together. I used two flat screwdrivers working on the side of the remote control; one levered open a bit and the other slipped in further and levered more to split it open. I think a blunt knife may also do the job; but never a sharp one because it will be too dangerous.

Lirik jikalau cinta. You need to accept some permanent depression at the edge of the control (better than a useless remote). Once you open some part, it become much more easy. After opening the outer case, you can access the buttons, but not he transmitting bulb in my case. I need to loosen two additional screws (i.e. Totally four, including the two inside the battery compartment) to loosen the electronic board a bit and I could correct the bended transmitting bulb. Ignou ba psychology study material. Then put everything back, clicked up the case and the remote worked again! Ben Posted on Aug 29, 2009.